Qualstar RLS-8350, Technical & Service Manual

Page: 5 / 111

511010 Rev. 07-01-19
iii
tify the process for recycling the materials and components that make up a Qualstar
tape library.
End of Life Instructions
Tools required
• P1 and P2 Phillips head screwdrivers
•
T20 Torx head screwdriver
•
Hex head (Allen) wrench/driver set
• 1/4-inch hex nut driver
Disassembly procedure
1. Remove magazine.
2. Remove center panel.
3. Remove rear panels and PCBA’s.
4. Remove internal subassemblies.
Items recyclable using conventional methods
•
Aluminum: Robotics
•
Stainless steel: Robot guides
• Steel: Exterior panels, some frames, fasteners
•
Plastic: Window, cartridge magazines, tape cassettes, exterior front
• Copper: Internal wiring, motors
• Paper: Manuals
Items that may have salvage or resale value
• Tape drives
•
EMI line power filter
Reduction of Hazardous Substances (RoHS)
Qualstar is committed to the implementation of RoHS (Restriction of the use of cer-
tain hazardous substances in electrical and electronic equipment) in accordance with
the European Directive. The effectivity date for compliance is July 1, 2006, at which
time Qualstar will certify that its Tape Library products are compliant with the RoHS