Qualstar RLS-8350, Technical & Service Manual

Page: 47 / 111

511010 Rev. 07-01-19
The Private 5-9
5.2.4 Z Corrections Screen
Figure 5-9 The Calibration/Z Corrections Screen
This screen shows the value of the mechanical position corrections determined during
calibration to adjust for mechanical manufacturing tolerances.
Information on this screen may be edited by pressing the Edit button. Note that
changes to the screen will not be saved until the Save button is pressed. Pressing the
Cancel button will remove all of the current editing.
Section Field Description Option
Z – IO Port Corrections Left IO Port Calibrated mechanical position corrections –
Right IO Port Calibrated mechanical position corrections –
Z – Drive Corrections Drive 1 Calibrated mechanical position corrections –
Drive 2 Calibrated mechanical position corrections –
Drive 3 Calibrated mechanical position corrections –
Drive 4 Calibrated mechanical position corrections –
Drive 5 Calibrated mechanical position corrections –
Drive 6 Calibrated mechanical position corrections –
Drive 7 Calibrated mechanical position corrections –
Z – Left Corrections Column A Calibrated mechanical position corrections –
Column B Calibrated mechanical position corrections –
Column C Calibrated mechanical position corrections –
Column D Calibrated mechanical position corrections –
Z – Right Corrections Column A Calibrated mechanical position corrections –
Column B Calibrated mechanical position corrections –
Column C Calibrated mechanical position corrections –
Column D Calibrated mechanical position corrections –
Table 5-4 Calibration/Z Corrections Screen Information