Qualstar RLS-8350, Technical & Service Manual

Page: 60 / 111

5-22 The Private
511010 Rev. 07-01-19
Section Field Description Option
Host Interface The type of connection the host has made to
the library through the tape drive’s interface. FC or SAS
Drive WWNN The World Wide Node Name assigned to the
tape drive. Variable
Primary Port This will be the port for tape drives with a single
port and this will be the first connection for dual
port tape drives. Yes or No
Primary Interface
Rate The speed of the connection from the host
through the tape drive’s interface in Gigabytes
per second. This will be the speed for tape
drives with a single port and this will be the first
for dual port tape drives. Variable
Primary WWPN
The World Wide Port Name assigned to tape
drives with a single port and this will be the first
connection for dual port tape drives.
Variable
Secondary Port Tape drives that have two ports can have the
second port connected. Yes or No
Secondary Interface
Rate The speed of the connection from the host
through the tape drive’s interface in Gigabytes
per second. Some tape drives have two ports
and if the second port is connected its speed
will be shown here. Variable
Secondary WWPN Some tape drives have two ports and if the
second port is connected its assigned WWPN
will be shown here. Variable
Drive 1 to 7
Supplies Enabled Whether or not the tape drive is enabled. –
Fault Is the tape drive functioning properly? Yes or No
Valid Indicates whether or not the library considers
the information in this field to be valid or not. Yes or No
Supply 12 (mV) This value displays the 12V supply voltage on
the tape drive in millivolts. –
Supply 5 (mV) This value displays the 5V supply voltage on
the tape drive in millivolts. –
Environment Fan Fault Is the fan in the tape drive carrier functioning
properly? Yes or No
Environment 24 (mV)
Limit This value displays the 24V supply voltage on
the Backplane PCBA in millivolts. –
Environment 24 (mV) This value displays the 24V supply voltage on
the drive carriers PCBA in millivolts. –
Environment 5 (mV) This value displays the 5V supply voltage on
the drive carriers PCBA in millivolts. –
Environment TempTc The temperature inside the Drive Carrier. Tenths of
a degree
Celsius
Table 5-13 Display Drive Screen Information