Qualstar RLS-4124, Technical & Service Manual

Page: 111 / 205

501510 Rev. S
Field – Replaceable Units (FRUs) 7-7
7.3 Required Tools and Materials
Table 7-3 is a complete list of the tools that would be required to replace every RLS
FRU. See individual FRU sections of this chapter for the tool needed to replace just
that FRU.
Required Tools
No. 1 Phillips Screwdriver
No. 2 Phillips Screwdriver
5/64-inch Allen (Hex) Driver/Wrench
1/4-inch Nutdriver or Open-Ended Wrench
Diagonal Cutters
Long Nose Pliers
Small Mirror (optional)
Flashlight (optional)
Table 7-3 Required Tools
The materials listed in Table 7-4 are required when replacing the indicated FRUs.
Qualstar
P/N
Manu-
facturer
Mfgr’s
P/N
Description Where Used
669-1001-9 Tyton T18R0 3-inch Cable Tie Power Cable between Drive Bay PCBA
and Executive PCBA
– 2 places.
FRUs: 510172, 510183
Dennison 08-433
Dennison 08-404
Panduit PLT1M-M30
730-0017-6 Loctite 242
Threadlocker
24077 Thread Locking
Adhesive Front Panel/Door (Bezel) Linkage
Screws FRU: 510179
Table 7-4 Replacement Materials