501510 Rev. S
The Private Menu
5-19
Value
Type
Description
Location
Location
Enter the location of the item you wish to query.
Ejected
TRUE/FALSE
A TRUE value indicates a tape is in the ejected position (Tape Drives
only).
EjectedValid
TRUE/FALSE
A TRUE indicates the Ejected value is known to be correct.
Label Error
TRUE/FALSE
A TRUE value indicates that no label was detected during scanning.
Label Valid
TRUE/FALSE
A TRUE value indicates the RLS attempted to read the barcode label.
Label
Data
Indicates the value read from the selected location’s barcode (if present)
Occupied
TRUE/FALSE
A TRUE value indicates that a cartridge occupies the selected location.
Occup.Valid
TRUE/FALSE
A TRUE value means the Occupied status for the selected location is
valid.
Present
TRUE/FALSE
A TRUE value indicates that a drive or other device is present at the se-
lected location.
Pres. Valid
TRUE/FALSE
A TRUE value means the Present status for the selected location is valid.
Source Loc.
Data
The Source value indicates the prior location of the cartridge that is cur-
rently at the selected location. The Item value is an internal number.
Source Valid
TRUE/FALSE
A TRUE value means the Source Location data for the selected location
is valid.
Type
Data
This value indicates the type of element that is at the selected location:
DRIVE, HANDLER or magazine SLOT.
Table 5-2 Private\Display Locations Descriptions
5.4.12
The Private\Display Positions status screen
P••Display Positions
Gripper:
ddddd
X:
ddddd
Period X: ddddd
Z:
ddddd
Period Z: ddddd
The Display Positions status screen displays the current position of the three carriage
motor-driven positioners. The positions are given in motor steps, counted from the
home position of each axis. There are 24 steps per revolution for the horizontal (X)
motor Axis and Insertion (Z) Axis motors. There are 200 steps per revolution for the
Gripper Axis motor.
•
Gripper
This value indicates the current step position of the gripper stepper motor.
•
X
This value indicates the current position of the horizontal (X-Axis) motor. The
value decreases as the carriage moves to the left. When the carriage is all the
way to the right stop, after a successful POST, the position is zero.
Summary of Contents for RLS-4124
