QUALITYFRY iQ 640, User Manual

Page: 78 / 102

7 8
Q U A L I T Y F R Y
M
ai
nt
enan
ce
1 . W A S H I N G M E T A L L I C F I L T E R
The bimonthly process must coincide with the cleaning of the inside
of the fryer and coincide with the full oil change. One must repeat
the steps previously explained plus the following additional ones.
- To clean the metal filter, remove the fryer from the appliance as
explained in the above steps.
- To gain access to the metal filter, open the two clips located on
the metal box in the right-hand part of the unit. * This part can be
washed in the sink or in the dishwasher.
- With the clips open, pull the door to the filters outwards.
The metal filter should only be removed for washing as the active
charcoal filter should not be disengaged from its site, be washed or
get wet, although it can be cleaned externally with kitchen paper
or a dry cloth.
- Once the metal filter is clean, it should be inserted into place with
the holes facing down.
Bimonthly
Use personal protection equipment (anti-cut gloves for work with
steel or sheet metal and protective gloves or utensils against
chemical agents) as mentioned in the Safety section.