3 1
e n
When the machine is installed, the following steps must be followed to
start up the system:
1. Open the right-hand side cover of the equipment.
2. Move the position of the extinguisher valve from the
Closed position
to the Open position
Otherwise the Fire Extinguishing System will not work.
In the initial start-up phase of the equipment, a certified fire
extinguishing system installer shall activate the system.
To activate it, the valve of the extinguisher must be opened,
certifying with a seal the correct operation of the extinguisher.
System validation - Valve opening
FIR
E E
X
TING
U
IS
HING
S
YS
TE
M
(F
ES
)
Close
Open
Summary of Contents for iQ 640
