6 3
6 3
E N
WITH MESSAGES ON THE SCREEN
FAULT
POSSIBLE CAUSES
SOLUTIONS
“FLAP ERROR”
The hatch is fitted incorrectly.
Check the input unit and correctly
place the hatch.
The input unit is dirty.
Clean the input unit as it may be
preventing the motor from
functioning correctly.
The carrousel is fitted incorrectly.
Switch off the machine, remove the
carrousel and put it back
in correctly.
The carousel does not move.
Remove the carousel. Turn the black
pinion of the carousel motor 3 times
in both directions. Put the carousel
back in its place and turn on the
machine.
The carousel still does not turn.
Contact Technical Support
The input hatch does not open.
Contact Technical Support
“FAN 1” ICON
ON THE SCREEN
The fan located on the top left of the
machine is blocked and does not
extract any air.
Clean the fan and check the extrac-
tor’s connections.
The fan does not extract air.
Contact Technical Support
“FAN 2” ICON
ON THE SCREEN
The fan located on the top right of the
machine is blocked and does not
extract any air.
Clean the fan and check the extrac-
tor’s connections.
The fan does not extract air.
Contact Technical Support
“CONDENSA
-
TION DRUM
FULL”
Drain drum full.
The drain drum is empty.
El bidón de desagüe está vacío.
Contact Technical Support
FIND
IN
G
F
A
UL
TS
A
ND
B
A
SIC
S
O
LU
TIO
N
S
Summary of Contents for iQ 1000 CARROUSEL
