INSTALL GUIDE
v20.4
ii)
Once the water runs clear into the container, turn off the faucet.
Step 17) For Whole House Carbon Filter Installation, see below for initially cleaning the
carbon filter tank. (Skip to the next step if not applicable.)
a) SLOWLY turn open the INLET side of the carbon filter bypass valve (opens
clockwise) until the carbon filter tank fills with water. Once the tank is full, the
water will stop running.
b) SLOWLY turn open the OUTLET side of the carbon filter bypass valve (opens
counter-clockwise).
c) Connect a hose to the bleed hose bib and run to a container or bucket.
d) Slowly open the bleed valve and let the water run.
e) Run the water until it shows clear.
i)
Use a container to view the water clarity. (This is to remove any carbon
dust, air and any plumbing debris before entering the softener system. Let
the water run until the water shows clear in the container.)
ii)
Once the water runs clear into the container, turn off the bleed hose bib.
1)
Note:
Check the water inside the container for clarity.
.
37
