INSTALL GUIDE
v20.4
Cold water should be almost immediate in the home, hot water can take up to a week if
using a non tankless water heater. You can drain the tank to make it go by faster if you
choose.
Do I need to Manually regenerate my softener to start off?
No.The system is already charged and ready to use, if you want to check for leaks
however. You may cycle through a regeneration by starting a manual regeneration, after
each cycle runs a few minutes you may hold any key for 3 seconds to advance to the
next cycle ( this avoids needing to let the whole process run). Continue this till the
system says returning to service.
Is the water softener based on usage or time?
The unit is set up to go on usage alone, if your unit is going longer than 14 days
between regenerations. You may go to advanced settings ( see program video) and
enter Regen Mode. Select Meter override and hit set. Setting the complete menu to
return. Tap the menu key once, you will see a new setting called (set days to regen
setting) set this setting to 14.
Contact Support:
https://qualitywatertreatment.com/support
42
