INSTALL GUIDE
v20.4
Step 13)
Shut-off the main water supply.
Close the water main shut-off valve to the home. It’s usually located in the front of the
property. If you have a shut off as water enters home you can also shut it off there.
a) Verify and label the water supply and feed lines for the water softener.
i)
For Pre-Built Soft Water Loops:
If a water softener has never been installed, cut the
water line softener loop. Use an appropriate pipe cutting tool.
ii) Place a bucket to catch the water. Then very slightly turn open the
water main to identify which side is the water supply line. Label the water
supply line inlet.
b)
For Replacing An Existing Water Softener
: After removing the old water
softener, place a bucket to catch the water.
i)Then very slightly turn open the water main to identify which side is the
water supply line. Label the water supply side.
32
