INSTALL GUIDE
v20.4
Attach the appropriate water lines to appropriate sides of the bypass
valve.
i)
The water supply line connects to the INLET side with the
blue
tag.
ii)
The feed/ soft water line connects to the OUTLET side with the
red
tag.
Directly push the quick-connect hose ends into the bypass valve.
Reinstall the red clips to secure the fittings. Gently tug on the clips to
make sure they are locked into place
.
Standard plumbing connection to the bypass valve. (Quick-Connect Kit was not
provided.)
a) Install the two elbow fittings into the bypass valve.
i)
Remove the two red clips from the bypass valve.
ii)
Push both elbow fittings into the bypass valve.
iii)
Slightly turn the fittings in place.
iv)
Reinstall the red clips to secure the fittings. Gently tug on the clips to
make sure they are locked into place.
26