Model Q4P07
Installation, Operation and Maintenance
2
Rev. 12/26/2013
Q4P07-IOM-Q.doc
G
ENERAL
S
PECIFICATIONS
SPECIFICATIONS
Q4P07
A
Length Overall
195½” [16’-3 1/2”]
B
Width Overall
100 1/2” (8’-4 1/2”)
C
Inside Columns
92 1/8”
D
Between Columns
147 ½” [12’-3 1/2”]
E
Height of Columns
79 1/2”
F
Height of Runway, Floor to runway top
5 ¾” min – 70 1/2” max
G
Width of Runways
20”
H
Width Between Runways
38”
I
Rise Height of Runway Top at Top Lock Position.
(allow 2-3/8” of clearance above top vehicle for lock release)
68-1/8”
Clear Height Underneath Runway (top lock position)
63”
J
Length, Base Plate to Base Plate
165” (13’- 9”)
K
Maximum Wheelbase
(Based on tire Diameter of 30”)
141.5”
Lifting Capacity
(Hydraulic Pressure at Cap.)
7,000 lbs.
(2600 psi)
Motor: HP/Voltage, Single Phase Std.
1HP/115v or 2HP/230v
Rise Time (approximate)
120 Seconds/115v or 60 seconds/230v
Runway Length (not including mounting flange)
150 1/2”
Fig 1 –
General Specifications and Service Bay Layout
(Power Unit location: Left Front as Shown or Right Rear)
