quadient DS-200iQ, Install Manual

Page: 12 / 49

8
AUG 2020
INSTALL GUIDE
2 INTRODUCTION DS-200iQ / DS-600iQ
REV 00
2.1 DETACHABLE COMPONENTS
The DS-200iQ/DS-600iQ machine is supplied on site with each module packaged
separately and with stands supplied in flat-pack form.
Check that the following detachable components described in this section are
all present.
2.1.1 INSERT HEAD COMPONENTS
Kit No. A0079370 (Euro) / A0086815 (UK 230V) / A0079369 (US 115V)
Kit No. (Datacard) A0104022 (Euro) / A0104023 (UK 230V) / A0104021 (US 115V).
COMPONENT PART NO. FACTORY REF. QTY
POWER CABLE (EURO) 9100358P 162-311 2
or POWER CABLE (UK) 9100356M 162-210 2
or POWER CABLE (US) + 9100360R 162-321UL 1
or POWER CABLE (US) A0093963 A2A-A0093963 1
Other Power Cables available (not supplied)
POWER CABLE (AUS) 9113211C 162-3130 3
POWER CABLE (CH) 9113210B 162-3120 A/R
COMPONENT PART NO. FACTORY REF. QTY
CLEANING KIT AUTO 1 9101632R A3104A 1
CAP OPENER 10L BOTTLE 9110955C N0-0092-A 1
MONITOR POST ASSY A0052726 A2A-A0052726 1
DS600 OUTFEED ASSY A0086537 A2A-A0086537 1
MONITOR POST COVER ASSY A0087134 A2A-A0087134 1
IIYAMA MONITOR PLATE A0081574 B2G-A0081574 1
LOOM ASSY PC COMMS A0082017 182-A0082017 1
CABLE RJ45 COMMS 1.25M 9113538T 160-514 1
GENERIC SAFETY GUIDE A0070526 K0A-A0070526 1
IMOS ADVICE DOCUMENT A0093887 K0A-A0093887 1
AIMS ADVICE DOCUMENT A0093888 K0A-A0093888 1
EXTERNAL FLOAT SWITCH (Datacard only) 9110289J A3-0421-A 1
2.1.2 VERSATILE FEEDER COMPONENTS
The following items are supplied separate to the Versatile Feeder unit:
COMPONENT PART NO. FACTORY REF. QTY
CABLE RJ45 COMMS 1M 9105914B 160-511 1
SCREW M5 x 10MM HEX HEAD A0075528 E2A-A0075528 *
NOTE:
‘
*
’ Quantity dependent upon machine configuration.
2.1.3 FLEX FOLDER COMPONENTS
The following items are supplied separate to the Flex Folder unit:
COMPONENT PART NO. FACTORY REF. QTY
TOWER FEED TRAY 500 A0072994 A2A-A0072994 *
ACCUMULATOR A0079649 A2A-A0079649 1
DIVERT TRAY 9111181N A2-1377-A 1
NOTE:
‘
*
’ Quantity dependent upon machine configuration.
Divert Tray (A2-1377-A) is part of Accumulator (A2A-A0079649) but is packed
separately.
Units are attached together using M5 x 10mm Hex Head Screws
(E2A-A0075528), supplied assembled to the unit.