AN-X3-GENI Page
35
Configuring the AN-X Module in RSLogix 5000
To configure the AN-X3-GENI in RSLogix 5000:
1.
Right click on the ControlLogix Ethernet module that will be communicating to the
AN-X and select
Add Module
. Add a 1756-ENBT/A module.
2.
Set the Major Rev to 1.
Set the
Name
to match the hostname of the AN-X in the Ethernet configuration.
Set the chassis size to 17 and the Slot to 16.
Set the revision to 1.1
Set the
Comm Format
or
Rack Connection
to None.
Set the IP address to match the AN-X module.
