USKI-5 Universal Sequencer & Keying Interface
© Copyright 2015 QSK, llc
www.qskllc.com
Page 13
By installing and using the USKI-5 Universal Sequencer and Keying Interface, you
agree to accept all responsibility for any resulting damage, injury, or related
consequences. The only warranty provided is for refund of your purchase price
or replacement of a defective unit during the first year after purchase. Output
relays are not included in this warranty.
--------------------------------------------ADDENDUM--------------------------------------
SEQUENCER TIMING WORKSHEETS
Use the following worksheets as necessary. Fill in descriptions of the devices being controlled
and the desired starting and ending delays.
Remember that for Programs (A), (B), or (C), the
sequence will progress from left to right for the start delays and from the right to the left
for the end delays.
For the output connections shown in previous station block diagrams, the CW key input to the
transmitter is device #5. Transmitter PTT (if controlled by the sequencer), will be connected to
output #4. For any output channels that are not used, enter 0 ms for their delays.
SEQUENCE TYPE (CW, PTT, etc.):___________________________________________________
DEVICE
OUTPUT #
1
2
3
4
5
START
DELAY, ms
END
DELAY, ms
SEQUENCE TYPE (CW, PTT, etc.):___________________________________________________
DEVICE
OUTPUT #
1
2
3
4
5
START
DELAY, ms
END
DELAY, ms
SEQUENCE TYPE (CW, PTT, etc.):___________________________________________________
DEVICE
OUTPUT #
1
2
3
4
5
START
DELAY, ms
END
DELAY, ms