QNO FQR8030, User Manual

Page: 46 / 149

2WAN 4LAN Medium Scale Multi-WAN QoS Router
43
Example 2: How do I configure Protocol Binding to keep traffic from all Intranet
IPs from going through WAN2 when the destinations are IP 211.1.1.1 ~
211.254.254.254 as well as the whole Class A group of 60.1.1.1 ~ 60.254.254.254,
while traffic to other destinations goes through WAN1?
As in the following figure, there are two rules to be configured. The first rule: Select “All
Port [TCP&UDP/1~65535]” from the pull-down option list “Service”, and then in the boxes
of “Source IP” input “192.168.1.0 ~ 0” (which means to include all Intranet IPs). In the
boxes for “Destination IP” input “211.1.1.1 ~ 211.254.254.254”. Select WAN2 from the
pull-down option list “Interface”, and then click “Enable”. Finally, click “Add New” and the
rule will be added to the mode. The second rule: Select “All Port [TCP&UDP/1~65535]” from
the pull-down option list “Service”, and then in the boxes of “Source IP” input “192.168.1.0
~ 0” (which means to include all Intranet IPs). In the boxes of “Destination IP” input
“211.1.1.1 ~ 60,254,254,254”. Select WAN2 from the pull-down option list “Interface”, and