QNO FQR8030 User Manual Download Page 78

Page: 78 / 149

2WAN 4LAN Medium Scale Multi-WAN QoS Router

Show Blocked IPs

To show the blocked IP list and the remained blocked time.

Restrict WEB Features:

Restrict WEB
Features:

It supports the block that is connected through: Java, Cookies,
Active X, and HTTP Proxy access.

Don’t Block Java /
ActiveX / Cookies
Proxy to Trusted
Domain:

If this option is activated, users can add trusted network or IP
address into the trust domain, and it will not block items such as
Java/ActiveX/Cookies contained in the web pages from the trust
domains.

Apply

Save the configuration

Cancel

Leave without making any change

Restrict Application

Users can tick

MSN/ Skype/ QQ/ BT

and the device will block the service users ticked.

However, to provide this service for certain IP address in the intranet, users may tick the

following item and then enter the specific IP address or IP address session to use the

services which are ticked above.

After modification, press “

Apply

” to save the network settings or press “

Cancel

” to

keep the settings unchanged.

Summary of Contents for FQR8030






















































































































































Search results

Summary of Contents for FQR8030

Reviews:

Related manuals for FQR8030

Brands by name

Popular brands

QNO FQR8030, User Manual

Search results

Summary of Contents for FQR8030

Reviews:

Related manuals for FQR8030

Brands by name

Popular brands