QNO FQR8030 User Manual Download Page 13

Page: 13 / 149

2WAN 4LAN Medium Scale Multi-WAN QoS Router

4.1.4 Firewall Status

SPI (Stateful Packet Inspection):

Indicates whether SPI (Stateful Packet Inspection) is on or off. The default configuration

is “Off”.

DoS (Denial of Service):

Indicates if DoS attack prevention is activated. The default configuration is “On”.

Block WAN Request:

Indicates that denying the connection from Internet is activated. The default configuration is

“On”.

Prevent Arp Virus Attack:

Indicates that preventing Arp virus attack is acitvated. The default configuration is

“Off”.

Remote Management:

Indicates if remote management is activated (on or off). Click the hyperlink to enter and

manage the configuration. The default configuration is “Off”.

Access Rule

Indicates number of activated access rules.

Summary of Contents for FQR8030






















































































































































Search results

Summary of Contents for FQR8030

Reviews:

Related manuals for FQR8030

Brands by name

Popular brands

QNO FQR8030, User Manual

Search results

Summary of Contents for FQR8030

Reviews:

Related manuals for FQR8030

Brands by name

Popular brands