QNO FQR8030 User Manual Download Page 38

Page: 38 / 149

2WAN 4LAN Medium Scale Multi-WAN QoS Router

modification; or click “

Cancel

" to leave without making any change.

Note!

In the load balance mode for Assigned Routing, the first WAN port (WAN1)

will be saved for the traffic of the IPs or the application service ports that are not

assigned to the other WAN (WAN2). Therefore, in this mode, we recommend

assigning one of the connections to the first WAN. When the other WAN (WAN2)

is broken and connection error remove (Remove the Connection) has been

selected for the connection detection system, traffic will be shifted to the first

WAN (WAN1). In addition, if the first WAN (WAN1) is broken, the traffic will be

shifted to the other WAN in turn. For example, the traffic will be shifted to

WAN2.

5.2.3 Protocol Binding

Bandwidth Configuration

Automatic load balance ratio will be made according to the upstream bandwidth users

input for the two WAN ports. For instance, if the upstream bandwidth for both WANs is

512Kbit/sec, the automatic balance ratio will be 1:1. If one WAN upstream bandwidth is

1024Kbit/sec while the other is 512Kbit/sec, the automatic balance ratio will be 2:1.

Therefore, to ensure the load can be really balanced, please input the actual upstream and

downstream bandwidth. In addition, the data users input will also affect the QoS

configuration. Please refer to

7.1.2. QoS Configuration.

After the changes are completed, click

“Apply”

to save the modification in network

configuration, or click

“Cancel"

to leave without making any changes.

Auto Load Balance Mode

Users can define specific IPs or specific application service ports to go through a

user-assigned WAN for external connections. For any other unassigned IPs and services,

Summary of Contents for FQR8030






















































































































































Search results

Summary of Contents for FQR8030

Reviews:

Related manuals for FQR8030

Brands by name

Popular brands

QNO FQR8030, User Manual

Search results

Summary of Contents for FQR8030

Reviews:

Related manuals for FQR8030

Brands by name

Popular brands