QNO FQR8030, User Manual

Page: 71 / 149

2WAN 4LAN Medium Scale Multi-WAN QoS Router
68
Disable:
To disable Session Control function.
Single IP cannot
exceed ___ Session
This option enables the restriction of maximum external
connections to each Intranet PC. When the number of
external connections reaches the limit, to allow new
connections to be built, some of the existing connections
must be closed. For example, when BT or P2P is being
used to download information and the connections
exceed the limit, the user will be unable to connect with
other services until either BT or P2P is closed.
Network Service
Detection:
(When single IP
exceed limit)
If this function is selected, when the user’s port
connection reach the limit, this user will not be able to
make a new connection for five minutes. Even if the
previous connection has been closed, new connections
cannot be made until the setting time ends.
If this function is selected, when the user’s port
connections reach the limit, all the lines that this user is
connected with will be removed, and the user will not be
able to connect with the Internet for five minutes. New
connections cannot be made until the delay time ends.
Scheduling
If “ Always ” is selected, the rule will be executed around
the clock. If “ From… ” is selected, the rule will be
executed according to the configured time range. For
example, if the time control is from Monday to Friday,
8:00am to 6:00pm, users can refer to the following figure
to set up the rule.
Days Management:
If “ Everyday ” is selected, the rule will be activated for
the control time range every day. Users can choose to
activate the rule during certain days of the week.
After the changes are completed, click “ Apply ” to save the configuration, or click
“ Cancel " to leave without making any change.