Step 2. Add camera to the VioStor by entering the IP address of the camera in the
“IP Address” settings, and the public IP address of the router and the mapped ports
of the camera to the “WAN IP Address” settings.
Note: When configuring the network camera, WAN IP and LAN IP must be entered.
To open FTP (port 21) and SMB (port 445) of the VioStor on WAN, you have to set
the following port mapping settings:
From Forward
to
219.87.144.205:21 192.168.1.1:21
219.87.144.205:139 192.168.1.1:139
219.87.144.205:445 192.168.1.1:445
After finishing the above two steps, you can access the VioStor via WAN by entering
the IP address http://219.87.144.205:8000 in the IE browser. Then login the
VioStor via the correct user name and password.
If the port specified to the VioStor is 80, you can enter http://219.87.144.205 to
access the VioStor as the default port of HTTP is 80.
Note: If the router does not use a fixed IP, you will need to configure DDNS on the
router. Other configurations are the same as above.
112
