Chapter 3.
Start to Use VioStor
When you have installed VioStor and other hardware, and connected it to the
network, you can use the browser in your PC to connect to VioStor. It is
recommended to use Microsoft Internet Explorer 6.0 for browsing.
Important Notice:
1.
Before you start to use VioStor, you must install a hard disk or two in VioStor,
finish disk volume configuration and format the hard disk(s). Otherwise, the
system may not function properly.
2.
When two disks are installed, make sure hard disk 1 is installed on top of hard
disk 2.
3.1
Connect to VioStor
Follow the steps below to connect to VioStor monitoring page:
1.
Open an IE browser and enter the IP address of VioStor. Or execute the QNAP
Finder shortcut on the Desktop. When the following screen is shown, double
click the name of VioStor.
Double click
VioStor name to
login the server
24
