QMS 2425, Reference

Page: 114 / 244

0HPRU\
406785%23ULQW6\VWHP5HIHUHQFH
(PXODWLRQ7HPSRUDU\
The K Mem Emul Temp, listed on the status page as Emulation Tem-
porary, is the number of kilobytes of RAM to be used by non-Post-
Script emulations for storing downloaded (soft) fonts, forms, or
macros.
'LVSOD\/LVW
The K Mem Display is the number of kilobytes of RAM dedicated to
the display lists. The display list holds the intermediate representation
of pages to be printed. Increasing the size of the Display List
increases the number of pages that can be collated. The maximum
number of pages that can be collated is 100 pages.
Menu Administration/Memory/Manual Config/K Mem Emul
Temp
Choices
00256-30720
Notes This value must be greater than the sum of the Min K
Spool for all installed and enabled interfaces. Data in
this client disappears when the printer is turned off.
Increasing this client’s size increases the number of
PCL downloaded fonts which can be accepted.The
maximum value listed depends on the amount of
memory installed and if a hard disk is present.
If you change the K Mem Emul Tmp value, the printer
automatically restarts after you save your changes and
exit from the Configuration menu.
Menu Administration/Memory/Manual Config/K Mem Display
Choices
00384-99999
Notes The maximum value listed depends on the amount of
memory installed and if a hard disk is present. If you
change the K Mem Display value, the printer
automatically restarts after you save your changes and
exit from the configuration menu.