QMS 2425, Reference

Page: 93 / 244

'XSOH[LQJ
3ULQWHU&RQILJXUDWLRQ
/LQH7HUPLQDWLRQ
Indicates the default line termination mode. This setting specifies the
treatment of line feeds and carriage returns. (See Appendix C, “Docu-
ment Option Commands,” for more information on line termination).
3RLQW6L]H[
Sets the point size for scalable default fonts in units of hundreths of a
point. For example, a 24 point default point size is selected by enter-
ing 2400.
The smallest increment allowed in point size is .25 point (for example,
8.5 point and 8.75 point fonts are allowed, but 8.6 point is not).
Menu Administration/Emulations/PCL 5E/Line Termination
Choices
CR=CR LF=LF
CR=CR+LF LF=LF
CR=CR LF=CR+LF
CR or LF=CR+LF
Default CR=CR LF=LF
Menu Administration/Emulations/PCL 5E/Point Size x100
Choices
00025-99975 (0.25-999.75 points)
Default 01200 (12 points)
Notes
If the font is not scalable or if a bitmap font is specified,
the setting is ignored.