QMS 2425, Reference

Page: 158 / 244

363URWRFRO
2SWLRQ
406785%23ULQW6\VWHP5HIHUHQFH
2SWLRQV
» Note: The serial and Token-Ring interfaces are options which must
be purchased through your QMS vendor. See appendix A, “QMS
Customer Support,” for a list of locations and telephone numbers.
Menu Administration/Communications/ Interface/PS Protocol
Choices
Name and Description
Normal—Enables standard, ASCII hex
protocol. Data is sent and received in
ASCII format. This mode is
recommended if you do not print
binary data. It was designed for data
in the printable ASCII range. Print
jobs can alter the PS protocol value
through PostScript operators.
Interfaces
Parallel, Serial,
Ethernet, Token-
Ring, LocalTalk
Normal Fixed—Enables standard, ASCII
hex protocol. Print jobs cannot alter
this value through PostScript
operators.
Parallel, serial,
Ethernet, Token-
Ring, LocalTalk
Binary—Enables binary communications
protocol. Print jobs can alter this
value through PostScript operators.
Data in the printable ASCII range
also prints).
Parallel, Serial,
LocalTalk,
Ethernet, Token-
Ring
Binary Fixed—Enables binary
communications protocol. Print jobs
can not alter this value through
PostScript operators. Data in the
printable ASCII range also prints.
Parallel, Serial,
LocalTalk,
Ethernet, Token-
Ring
QBinary (Quoted Binary)—Enables
binary communications protocol.
Print jobs can alter this value through
PostScript operators. Data in the
printable ASCII range also prints.
Use the special quoting mechanism
for the special characters and ^D
(EOF).
Ethernet, Token-
Ring