QMS 2425, Reference

Page: 119 / 244

'XSOH[LQJ
3ULQWHU&RQILJXUDWLRQ
6SHFLI\LQJ3DJH5HFRYHU\$FWLRQ
When a media jam or other similar error occurs, the printer can reprint
the job starting from the page on which the jam occurred.
6HWWLQJ7RQHU/RZ$FWLRQ
You can configure the printer to stop or to continue printing when a
TONER LOW ACT.
error message is displayed in the message win-
dow.
Notes If your printer is configured for duplex printing and has
less than 16 MB RAM, 600x600 dpi isn’t available on all
media sizes. Duplexing using 600x600 or 1200x1200
resolution requires additional memory. See the “High-
Resolution and Duplexing” section in chapter 3,
“Advanced Printing Features,” of the
Operation guide.
The 1200 dpi option does not show up in this menu until
the optional 1200x1200 dpi daughterboard is installed
and the frame buffer has sufficient memory to support
1200 dpi. Restoring defaults or selecting Quick Config
should reconfigure the frame buffer memory client
Menu Administration/Engine/Page Recovery
Choices
On—Reprints a print job from the page on which the jam
or error occurred.
Off—Don’t reprint a print job when a jam or error occurs.
Default
Off
Menu
Administration/Engine/Toner Out Act.
Choices Continue—Continue printing when a
TONER LOW ACT
message displays.
Stop—Stop printing when a
TONER LOW ACT
message displays.
Default
Continue