QMS 2425, Reference

Page: 109 / 244

'XSOH[LQJ
3ULQWHU&RQILJXUDWLRQ
more detailed information on the printer’s memory and what benefits,
if any, may result from adding memory to each client.
To find out how memory is currently allocated, print a status page
using the Print Status key on the control panel or check each client
individually in the configuration menu.
4XLFN&RQILJXUDWLRQ0HQX
This submenu allows you to “quickly configure” the memory clients to
the settings which allow the printer to perform best. The results of
Quick Config depend on the amount of memory installed, the resolu-
tion used for printing, and paper size.
» Note: This menu will appears only if there is no hard disk installed in
the printer or if Enable Disk Swap is turned off. The 1200 dpi selection
only appears if the optional 1200x1200 dpi daughterboard is installed.
(QDEOH'LVN6ZDS0HQX
Enable Disk Swap gives your printer virtual memory capability for all
memory clients through the creation of a “swap file” on the printer’s
Menu
Administration/Memory/Quick Config/300dpi
Choices Letter/A4, Legal, Ledger, Universal, A5, A3, B5, B4,
Statement, Executive
Menu
Administration/Memory/Quick Config/600dpi
Choices Letter/A4, Legal, Ledger, Universal, A5, A3, B5, B4,
Statement, Executive
Menu
Administration/Memory/Quick Config/1200dpi
Choices Letter/A4, Legal, Ledger, Universal, A5, A3, B5, B4,
Statement, Executive
Note
Under the Quick Config option documented on the
advanced status page you will see “****”. This option
isn’t user-definable. Quick Config only configures
memory depending on the resolution and paper size.