3 – Virtual I/O Command Line Interface
Groups and Commands
D000025-002 Rev. A
3-79
A
NOTE:
When an external Ethernet link is removed or otherwise goes down,
aggregation failover can take over and distribute the Ethernet traffic through
other ports in the aggregation. This setting controls the minimum number
of ports that must be remaining in an aggregation for aggregation failover
to run on the specified port. If less than this number of ports are present,
aggregation failover will not be enabled and any remote hosts using that
port will see the link status as down. Aggregation failover is only relevant
for ports in a manual or 802.3ad aggregation. The default setting is '0',
which disables aggregation failover.
ethVirtAssignedHostGet
View assignment of virtual port.
Syntax:
Options:
Sample Output:
NOTE:
Show assignment of virtual port to attach to host. If an instance is not
specified, all ports will be displayed. Related commands:
ethVirtAssignedHostSet, ethVirtAssignedHostRem
ethVirtAssignedHostGet <instance(s)>
instance
port number
-> ethVirtAssignedHostGet 61
ethVirtAssignedHostGet(0):
------------------------------------------
Port Host(2) Inst IOC
61 (none) 0 0
