3 – Virtual I/O Command Line Interface
Groups and Commands
3-74
D000025-002 Rev. A
S
ethExtLacpDisable
Disable 802.3ad for the specified Ethernet port.
Options:
Sample Output:
NOTE:
Disable 802.3ad Lacp for the specified port(s). If any of the ports are part
of an aggregation, they will be removed before disabling Lacp. The port
parameter can be either a single port, or a list of ports separated by spaces
and enclosed in double quotes.
ethExtLacpGet
Display enabled status of LACP.
Syntax:
Options:
Sample Output:
NOTE:
802.3ad Lacp can be enabled or disabled on a per port basis. This command
displays information on the Lacp enabled state for all specified Ethernet
ports. The port parameter can be either a single port, or a list of ports
separated by spaces and enclosed in double quotes.
port
External Ethernet port (or list of ports) to disable Lacp.
thExtLacpDisable 1
802.3ad Lacp disabled for External Ethernet port 1 [Ext-1].
ethExtLacpGet port
port
External Ethernet port (or list of ports) to display Lacp enabled information.
-> ethExtLacpGet 1
802.3ad Lacp for External Ethernet port 1 [Ext-1]: enabled
-> ethExtLacpFailoverGet
Port Min Ports for Failover
--------------------------------------
1 [Ext-1 ] : 0
2 [Ext-2 ] : 0
