2 – Switch Command Line Interface
Groups and Commands
2-60
D000025-002 Rev. A
S
Sample Output:
NOTES:
PKeys are used for partitioning the subnet. Only configure PKeys if the
host driver supports this. Invalid configuration of the PKey may render the fabric
inoperable.
smInfoKey
Set the subnet manager key (SMInfo) value.
Syntax:
Options:
Sample Output:
NOTES:
Use this command to set the SM key. SM must be offline and key value is
up to 8 byte hex.
smMgmtKey
Set the subnet manager management key (portInfo) value.
Syntax:
Options:
Sample Output:
-> smPKeys 0 0xffff "Default PKey"
Successfully set PKey index: 0 to 0xffff
smInfoKey [key]
key
The SmInfo key (8 byte value in hex or decimal).
-> smInfoKey 0x1
SM Key: 0x0000000000000001 (1 decimal).
smMgmtKey [mKey]
mKey
The management key (8 byte value in hex or decimal)
-> smMgmtKey 0x11
SM management key: 0x0000000000000011 (17 decimal)
