2 – Switch Command Line Interface
Groups and Commands
2-62
D000025-002 Rev. A
S
smDefBcGroup
Set/display default multicast group configuration.
Syntax:
Options:
Sample Output:
NOTES:
This will enable or disable auto-creation of a default broadcast group with
one member with a GUID of 0x00066A00FACADE01. Executing this command with
with the argument 'default' sets the default broadcast group with pkey=0xffff, MTU=4
(2048), RATE=3 (10GB), SL=0, QKey=0, FlowLabel=0, TClass=0. If auto-creation
was disabled and you choose to enable auto-creation while the SM is running, the
group will be created immediately.
Valid MTU values are 1(256), 2(512), 3(1024), 4(2048), and 5(4096)
smDefBcGroup [enable | disable] [default | pKey [mtu
[rate [sl [qKey] [fl [tc]
enable
Enable auto-creation of multicast group at SM startup.
disable
Disable auto-creation of multicast group at SM startup.
default
Set PKey, MTU, rate, SL, QKey FlowLabel, and TClass to default values.
pkey
Partition Key. If no value entered, defaults to use the default PKey (0xFFFF).
mtu
Maximum transfer unit. If no value entered, defaults to use mtu of 2048.
rate
Data Rate. If no value is entered, defaults to use a rate of 10GB.
sl
Service level. If no value is entered, defaults to service level 0.
qKey
Queue Key. If no value is entered, defaults to 0.
FlowLabel
Flow Label. If no value is entered, defaults to 0.
TClass
Traffic Class. If no value entered, defaults to 0.
-> smDefBcGroup 0xffff 4 3 0
