Qlogic SANbox2 SANbox2-64, User Manual

Page: 180 / 224

A – Command Line Interface
Zone Command
A-76 59048-01 A
list
Displays a list of all zones and the zone sets of which they are members. This
keyword is valid for User authority and does not require a zoning edit session.
members [zone]
Displays all members of the zone given by [zone]. This keyword is available with
User authority and does not require a Zoning Edit session.
remove [zone] [members]
Removes the ports/devices given by [members] from the zone given by [zone].
[members] can have one of the following formats:
■
Domain ID and port number pair (Domain ID, Port Number). Domain IDs and
port numbers are in decimal. Ports are numbered beginning with 0.
■
6-character hexadecimal device Fibre Channel address (hex)
■
16-character hexadecimal worldwide port name (WWPN) with the format
xx:xx:xx:xx:xx:xx:xx:xx.
■
Alias name
rename [zone_old] [zone_new]
Renames the zone given by [zone_old] to the zone given by [zone_new].
type [zone] [zone_type]
Specifies the zone type given by [zone_type] to be assigned to the zone name
given by [zone]. If you omit the [zone_type], the system displays the zone type for
the zone given by [zone]. [zone_type] can be one of the following:
soft
Name server zone
hardACL
Access control list hard zone. This keyword is case sensitive.
hardVPF
Virtual private fabric hard zone. This keyword is case sensitive.
zonesets [zone]
Displays all zone sets of which the zone given by [zone] is a member. This
keyword is available with User authority and does not require a Zoning Edit
session.