Qlogic SANbox2 SANbox2-64, User Manual

Page: 160 / 224

A – Command Line Interface
Show Config Command
A-56 59048-01 A
Show Config Command
Displays switch, I/O blade, port, alarm threshold, and zoning attributes for the
current configuration.
Authority
User
Syntax
show config
blade [slot_number]
port [port_number]
switch
threshold
zoning
Keywords
blade [slot_number]
Displays configuration parameters for the I/O blade or cross-connect blade that
occupies the slot given by [slot_number]. If you omit [slot_number], the
configuration parameters for all I/O and cross-connect blades.
port [port_number]
Displays configuration parameters for the port number given by [port_number].
Ports are numbered beginning with 0. If the port value is omitted, all ports are
specified.
switch
Displays configuration parameters for the switch.
threshold
Displays alarm threshold parameters for the switch.
zoning
Displays zoning configuration parameters for the switch.
Examples
The following is an example of the Show Config Port command:
SANbox2-64 N108 #> show config port 3
Configuration Name: default
-------------------
Port Number: 3
------------
AdminState Online
LinkSpeed Auto
PortType GL
TLPortMode TLInitiatorMode
ISLSecurity Any
SymbolicName Port4
ALFairness False
ARB_FF False
InteropCredit 0