manualshive.com logo in svg

Qlogic SANbox2 SANbox2-64, User Manual, Page: 17 / 224

Share
Download
Qlogic SANbox2 SANbox2-64 User Manual Download Page 17

2 – Using SANbox Manager

Installing SANbox Manager

59048-01 A

2-5

2.1.4

SANbox2 Installation Disk - Windows Installation

To install the SANbox Manager application on Windows from the SANbox2 
Installation Disk, do the following:

1.

Close all programs currently running, and insert the SANbox2 Installation 
Disk into the management workstation CD-ROM drive.

2.

Using Windows Explorer, double-click the drive letter which contains the 
SANbox2 Installation Disk.

3.

Double click the SANbox_Manager folder, then double click the Windows 
folder.

4.

Double click the executable file and follow the SANbox Manager installation 
instructions.

2.1.5

SANbox2 Installation Disk - Linux Installation

To install the SANbox Manager application on Linux from the SANbox2 Installation 
Disk, do the following:

1.

Close all programs currently running, and insert the SANbox2 Installation 
Disk into the management workstation CD-ROM drive.

2.

Open the File Manager and double-click on the CD-ROM icon.

3.

Double click the SANbox_Manager folder, then double click the Linux folder.

4.

Double click the executable file and follow the SANbox Manager installation 
instructions.

2.1.6

SANbox2 Installation Disk - Solaris Installation

To install the SANbox Manager application on Solaris from the SANbox2 
Installation Disk, do the following:

1.

Close all programs currently running, and insert the SANbox2 Installation 
Disk into the management workstation CD-ROM drive.

2.

Open a terminal window. If the disk isn’t already mounted, enter the 
following command:

mount /mnt/cdrom

3.

Move the directory on the disk that contains the executable. Enter the 
following command:

cd cdrom/cdrom0/sanbox~1/solaris

4.

Run the executable and follow the SANbox Manager installation instructions. 
Enter the following command:

pkgadd -d sol_pkg

Summary of Contents for SANbox2 SANbox2-64

































































































































































































































Reviews:

No comments