Qlogic SANbox2 SANbox2-64, User Manual, Page: 195 / 224

C – Messages
Network Properties Dialog
59048-01 A C-3
C.3
Network Properties Dialog
Table C-3. Network Properties Dialog Messages
Message User Action
Attempt to change snmp community
strings failed.
Or
Attempt to change syslog configuration
failed. Verify that the data is valid, that the user
has permissions to modify the
configuration on the switch, that the switch
is reachable in the fabric, and that the
fabric is reachable from the user’s
workstation, then retry the configuration
change.
Unable to apply invalid syslog host
address Verify that either a syntactically correct IP
address was specified for the syslog host,
or that a host name was specified for a
valid syslog host that is reachable from the
user’s workstation.