manualshive.com logo in svg

Qlogic SANbox 5802V, Interface Manual

Share
Download
Qlogic SANbox 5802V Interface Manual Download Page 292

14 – Command Reference

Set Setup Services

14-118

59263-01  A

S

Examples

The following is an example of the Set Setup Services command:

SANbox #> admin start

SANbox (admin) #> set setup services

  A list of attributes with formatting and current values will follow.

  Enter a new value or simply press the ENTER key to accept the current value.

  If you wish to terminate this process before reaching the end of the list

  press 'q' or 'Q' and the ENTER key to do so.

  PLEASE NOTE:

  -----------

  * Further configuration may be required after enabling a service.

  * If services are disabled, the connection to the switch may be lost.

  * When enabling SSL, please verify that the date/time settings

    on this switch and the workstation from where the SSL connection

    will be started match, and then a new certificate may need to be

    created to ensure a secure connection to this switch.

  TelnetEnabled       (True / False)   [True ]

  SSHEnabled          (True / False)   [False]

  GUIMgmtEnabled      (True / False)   [True ]

  SSLEnabled          (True / False)   [False]

  EmbeddedGUIEnabled  (True / False)   [True ]

  SNMPEnabled         (True / False)   [True ]

  NTPEnabled          (True / False)   [False]

  CIMEnabled          (True / False)   [False]

  FTPEnabled          (True / False)   [True ]

  MgmtServerEnabled   (True / False)   [True ]

  CallHomeEnabled     (True / False)   [True ]

  Do you want to save and activate this services setup? (y/n): [n]

MgmtServerEnabled

Enables (True) or disables (False) the management of the 
switch through third-party applications that use GS-3 Man-
agement Server (MS). This parameter is the master control 
for the Set Config Port command parameter, MSEnable. The 
default is True.

CallHomeEnabled

Enables (True) or disables (False) the Call Home service 
which controls e-mail notification. The default is True.

Table 14-28. Switch Services Settings  (Continued)

Entry

Description

Summary of Contents for SANbox 5802V





























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands