Qlogic SANbox 5802V Page 111 Interface Manual Download

Page: 111 / 412

7 – Zoning Configuration

Saving the Active and Merged Zone Sets

59263-01 A

7-13

Saving the Active and Merged Zone Sets

You can save the active zone set and merged zone set to the non-volatile zoning
database. Enter the

Zoning Active

Capture to save the active zone set as shown

in the following example:

SANbox (admin) #> zoning active capture

This command will overwrite the configured zoning database in NVRAM.

Please confirm (y/n): [n] y

The active zoning database has been saved.

Enter the

Zoning Merged

Capture to the save the merged zone set as shown in

the following example:

SANbox (admin) #> zoning merged capture

This command will overwrite the configured zoning database in NVRAM.

Please confirm (y/n): [n] y

The merged zoning database has been saved.

Resetting the Zoning Database

There are two ways to remove all aliases, zones, and zone sets from the zoning
database:

Enter the

Zoning Clear

command as shown in the following example:

SANbox #> admin start

SANbox (admin) #> zoning edit

SANbox (admin-zoning) #> zoning clear

SANbox (admin-zoning) #> zoning save

Enter the

Reset

Zoning command as shown in the following example. The

zoning configuration values, MergeAutoSave, DefaultZone, and
DiscardInactive remain unchanged. This is the preferred method.

SANbox #> admin start

SANbox (admin) #> reset zoning

Summary of Contents for SANbox 5802V





























































































































































































































































































































































































































Search results

Summary of Contents for SANbox 5802V

Reviews:

Related manuals for SANbox 5802V

Brands by name

Popular brands

Qlogic SANbox 5802V, Interface Manual

Search results

Summary of Contents for SANbox 5802V

Reviews:

Related manuals for SANbox 5802V

Brands by name

Popular brands