manualshive.com logo in svg

Qlogic SANbox 5802V, Interface Manual, Page: 234 / 412

Share
Download
Qlogic SANbox 5802V Interface Manual Download Page 234

14 – Command Reference

Ping

14-60

59263-01  A

S

Ping

Initiates an attempt to communicate with another switch over an Ethernet network 
and reports the result.

Authority

None

Syntax

ping

[host_name]
-ipv4 [host_address]
-ipv6 [host_address]

Keywords

[host_name]

DNS host name of the switch you want to query. [host_name] is a character string 
of 2–125 characters made up of one or more subdomains delimited by periods (.). 
The following naming rules apply:

„

Valid characters are alphanumeric characters, period (.), and hyphen (-).

„

Each subdomain must be a minimum of two alphanumeric characters.

„

Each subdomain must start and end with an alphanumeric character.

„

A host name can end with a period (.).

-ipv4 [host_address]

IP address (version 4) or DNS host name of the switch you want to query. 
Broadcast IP addresses, such as 255.255.255.255, are not valid.

-ipv6 [host_address]

IP address (version 6) or DNS host name of the switch you want to query.

Examples

The following is an example of a successful Ping command:

SANbox #> ping 10.20.11.57

  Ping command issued. Waiting for response...

SANbox #>

  Response successfully received from 10.20.11.57.

This following is an example of an unsuccessful Ping command:

SANbox #> ping 10.20.11.57

  Ping command issued. Waiting for response...

  No response from 10.20.11.57. Unreachable.

Summary of Contents for SANbox 5802V





























































































































































































































































































































































































































Reviews:

No comments