Qlogic SANbox 5802V Interface Manual Download Page 159

Page: 159 / 412

12 – Call Home Configuration

Managing the Call Home Database

59263-01 A

12-11

Modifying a Profile

Enter the Profile Edit command to modify an existing Call Home profile as shown
in the following example:

SANbox #> admin start

SANbox (admin) #> callhome edit

SANbox (admin-callhome) #> profile edit profile_1

A list of attributes with formatting and current values will follow.

Enter a new value or simply press the ENTER key to accept the current value.

If you wish to terminate this process before reaching the end of the list

press 'q' or 'Q' and the ENTER key to do so.

Current Values:

Level Alarm

Format ShortText

MaxSize 1000

EmailSubject Switch Problem

RecipientEmail (up to 10 entries allowed)

1. [email protected]

New Value (press ENTER to accept current value, 'q' to quit):

Level (Alarm,Critical,Warn,None) :

Format (1=FullText, 2=ShortText, 3=Tsc1) : 1

MaxSize (decimal value, 650-100000) :

EmailSubject (string, max=64 chars, N=None) :

RecipientEmail (ex: [email protected], N=None)

1. [email protected] :

2. <undefined> :

The profile has been edited.

This configuration must be saved with the 'callhome save' command

before it can take effect, or to discard this configuration

use the 'callhome cancel' command.

SANbox (admin-callhome) #> callhome save

The CallHome database profiles will be saved and activated.

Please confirm (y/n): [n] y

Summary of Contents for SANbox 5802V





























































































































































































































































































































































































































Search results

Summary of Contents for SANbox 5802V

Reviews:

Qlogic SANbox 5802V, Interface Manual, Page: 159 / 412

Search results

Summary of Contents for SANbox 5802V

Reviews: