Qlogic SANbox 5802V Interface Manual Download Page 285

Page: 285 / 412

14 – Command Reference

Set Setup Callhome

59263-01 A

14-111

Examples

The following is an example of the Set Setup Callhome command:

SANbox (admin) #> set setup callhome

A list of attributes with formatting and current values will follow. Enter a new

value or simply press the ENTER key to accept the current value. If you wish to

terminate this process before reaching the end of the list press 'q' or 'Q' and the

ENTER key to do so.

If either the Primary or Secondary SMTP Servers are enabled, the FromEmailAddress

attribute must be configured or the switch will not attempt to deliver messages.

Current Values:

PrimarySMTPServerAddr 0.0.0.0

PrimarySMTPServerPort 25

PrimarySMTPServerEnable False

SecondarySMTPServerAddr 0.0.0.0

SecondarySMTPServerPort 25

SecondarySMTPServerEnable False

ContactEmailAddress [email protected]

PhoneNumber <undefined>

StreetAddress <undefined>

FromEmailAddress [email protected]

ReplyToEmailAddress [email protected]

ThrottleDupsEnabled True

New Value (press ENTER to accept current value, 'q' to quit):

PrimarySMTPServerAddr (IPv4, IPv6, or hostname) :

PrimarySMTPServerPort (decimal value) :

PrimarySMTPServerEnable (True / False) :

SecondarySMTPServerAddr (IPv4, IPv6, or hostname) :

SecondarySMTPServerPort (decimal value) :

SecondarySMTPServerEanble (True / False) :

ContactEmailAddress (ex: [email protected]) :

PhoneNumber (ex: +1-800-123-4567) :

StreetAddress (include all address info) :

FromEmailAddress (ex: [email protected]) :

ReplyToEmailAddress (ex: [email protected]) :

ThrottleDupsEnabled (True / False) :

Do you want to save and activate this Callhome setup? (y/n):

Summary of Contents for SANbox 5802V





























































































































































































































































































































































































































Search results

Summary of Contents for SANbox 5802V

Reviews:

Qlogic SANbox 5802V, Interface Manual, Page: 285 / 412

Search results

Summary of Contents for SANbox 5802V

Reviews: