Qlogic SANbox 5802V Interface Manual Download Page 185

Page: 185 / 412

14 – Command Reference

Capture

59263-01 A

14-11

Examples

The following is an example of the Capture Add command:

SANbox #> admin start

SANbox (admin) #> callhome edit

SANbox (admin-callhome) #> capture add

A list of attributes with formatting and default values will follow.

Enter a value or simply press the ENTER key to accept the default value.

If you wish to terminate this process before reaching the end of the list

press 'q' or 'Q' and the ENTER key to do so.

Value (press ENTER to accept the default, 'q' to quit):

TimeOfDay (HH:MM) [02:00]

DayOfWeek (Sun,Mon,Tue,Wed,Thu,Fri,Sat) [Sat ]

Interval (decimal value, 1-26 weeks) [1 ]

A capture entry has been added to profile Tech_Support_Center.

This configuration must be saved with the 'callhome save' command

before it can take effect, or to discard this configuration

use the 'callhome cancel' command.

The following is an example of the Capture Edit command:

SANbox #> admin start

SANbox (admin) #> callhome edit

SANbox (admin-callhome) #> capture edit

Capture Entries for Profile: Tech_Support_Center

Index TimeOfDay DayOfWeek Interval

----- --------- --------- --------

1 02:00 Sat 1 (weeks)

Please select a capture entry from the list above ('q' to quit): 1

A list of attributes with formatting and current values will follow.

Enter a value or simply press the ENTER key to accept the current value.

If you wish to terminate this process before reaching the end of the list

press 'q' or 'Q' and the ENTER key to do so.

Value (press ENTER to accept the default, 'q' to quit):

TimeOfDay (HH:MM) [02:00]

DayOfWeek (Sun,Mon,Tue,Wed,Thu,Fri,Sat) [Sat ]

Interval (decimal value, 1-26 weeks) [1 ]

The selected capture entry has been edited for profile Tech_Support_Center.

This configuration must be saved with the 'callhome save' command

before it can take effect, or to discard this configuration

use the 'callhome cancel' command.

Summary of Contents for SANbox 5802V





























































































































































































































































































































































































































Search results

Summary of Contents for SANbox 5802V

Reviews:

Brands by name

Popular brands

Qlogic SANbox 5802V, Interface Manual

Search results

Summary of Contents for SANbox 5802V

Reviews:

Brands by name

Popular brands