manualshive.com logo in svg

Qlogic SANbox 5602, User Manual, Page: 216 / 324

Share
Download
Qlogic SANbox 5602 User Manual Download Page 216

A – Command Line Interface
Ping Command

A-42

59097-01 A

0

Ping Command

Initiates an attempt to communicate with another switch over an Ethernet network 
and reports the result.

Authority

None

Syntax

ping [ip_address]

Keywords

[ip_address]

The IP address of the switch to query. Broadcast IP addresses, such as 
255.255.255.255, are not valid.

Examples

The following is an example of a successful Ping command:

SANbox Manager #> ping 10.20.11.57

  Ping command issued. Waiting for response...

SANbox Manager #>

  Response successfully received from 10.20.11.57.

This following is an example of an unsuccessful Ping command:

SANbox Manager #> ping 10.20.10.100

  Ping command issued. Waiting for response...

  No response from 10.20.10.100. Unreachable.

Summary of Contents for SANbox 5602





































































































































































































































































































































Reviews:

No comments