9–Fibre Channel Over Ethernet
FCoE Boot from SAN
120
83840-546-00 E
3.
Ensure DCB/DCBX is enabled on the device (
supported on DCBX capable configurations. As such, DCB/DCBX must be
enabled, and the directly attached link peer must also be DCBX capable with
parameters that allow for full DCBX synchronization.
Figure 9-2. FCoE Boot<Variable>—Enable DCB/DCBX
4.
On some platforms, you may need to set the boot protocol through system
BIOS configuration in the integrated devices pane as described above.
For all other devices, set the
Boot Protocol
field to
FCoE
in the MBA
) through CCM.
Figure 9-3. FCoE Boot<Variable>—Select FCoE Boot Protocol
Summary of Contents for FastLinQ 3400 Series
Page 286: ......
