4–Windows Driver Software
Manually Extracting the Device Drivers
20
83840-546-00 E
To perform a silent install from within the installer source folder
Type the following:
setup /s /v/qn
To perform a silent upgrade from within the installer source folder
Type the following:
setup /s /v/qn
To perform a silent reinstall of the same installer
Type the following:
setup /s /v"/qn REINSTALL=ALL"
To perform a silent install to force a downgrade (default is NO)
setup /s /v” /qn DOWNGRADE=Y”
Manually Extracting the Device Drivers
To manually extract the Windows device drivers, type the following
command:
setup /a
This will run the setup utility, extract the drivers, and place them in the designated
location.
NOTE
The REINSTALL switch should only be used if the same installer is already
installed on the system. If upgrading an earlier version of the installer, use
setup /s /v/qn
as listed above.
Summary of Contents for FastLinQ 3400 Series
Page 286: ......
