9–Fibre Channel Over Ethernet
FCoE Boot from SAN
148
83840-546-00 E
11.
For BCM57800 and BCM57810 boards, the FCoE boot devices need to
have a separate vSwitch other than vSwith0. This allows DHCP to assign
the IP address to the management network rather than to the FCoE boot
device. To create a vSwitch for the FCoE boot devices, add the boot device
vmnics in vSphere Client under Networking.
Configuring FCoE Boot from SAN on VMware
Note that each host must have access only to its own boot LUN—not to the boot
LUNs of other hosts. Use storage system software to ensure that the host
accesses only the designated LUNs.
Summary of Contents for FastLinQ 3400 Series
Page 286: ......
