AP3X Robot User Manual
2 Document Version V1.1.0 (01/11/2023)
Personnel responsible for installation, operation and maintenance of QKM
robots must receive rigorous training to understand all safety precautions
and proper methods of operation and maintenance before operating and
maintaining the robot.
Users should ensure that the robot is operated under safety conditions.
Objects around the robot should not cause damage to it. As the robot may be
scratched and bumped due to the motion of its movable mechanical parts,
users should carry out risk assessment according to the environment and set
up special facilities for protection.
The area equivalent to the motion area of the robot +100 mm is dangerous.
To prevent personnel from entering the motion area of the robot, be sure to
install a safety fence to prohibit personnel from entering the dangerous area.
When the temperature is close to the freezing point, operate the robot at the
speed of 10% or less for more than 10 minutes to preheat it; perform other
operations after preheating the robot.
Detergents with strong corrosion are not suitable for cleaning the robot.
Anodized parts should not be cleaned by immersion.
Non-professionals shall not repair the faulty products without permission.
Do not disassemble the electronic control cabinet arbitrarily. If the product
fails, please contact QKM Customer Service in time.
