AP3X Robot User Manual
14 Document Version V1.1.0 (01/11/2023)
Chapter 3
Main components
3.1
Base
The base of AP3X Robot is produced with high-strength aluminum alloy through
overall casting, as shown in Figure 3-1. The electrical system is installed in the base
and the servo motor is installed on the base; an interface panel is installed at the side
of the base indicating the status, power and communication connection. Refer to
Chapter 4 for functions of the interface panel. Three bosses are installed on the base
and each boss is set with one through-hole and two threaded holes for installing bolts
to fix the base. Positions where external parts are fixed are set on the bottom of the
base.
