Operating
screens
Operating manual HR9
– QS203263
55
Program settings layer processing
Setting
Description
Speed profile
layer processing
Speed of layer processing movements
-
Moving with layer: When transporting layer to pallet load
-
Layer drop-off: While dropping layer on pallet load
Percentage of Nominal speed. 100% = Nominal speed
Acceleration is in seconds, from standstill to desired speed.
Deceleration is in seconds, from actual speed to standstill.
Speed profile
soft touch layer
As soon as the front restraint shifts a layer to the pallet load, it can be chosen to
do this at a lower speed than is set in the speed profile.
This makes it possible to reduce the impact of the moving pusher on the stationary
layer.
Enter the starting position and the length of the area to which a different speed
profile applies. 0=not active
Layer receiving
position
Here you can set per movement at which position it waits until a layer is present
on the stacking plates.
