Operating
the
palletiser
Operating manual HR9
– QS203263
125
8. You will now see that the batch is loaded into the
field above it, and now the batch is running on the
machine.
Manual batch removal
1. Make sure the machine has stopped.
The state of the machine must be one of
the following:
-
STOPPED
-
IDLE
If this is the case, follow step 5
If not, follow step 2,
2. Press the stop button on the control
panel of the machine.
3. Wait until the machine comes to a
complete stop.
INFO
The machine will switch to
the ‘STOPPING’ state.
4. Check if the machine is in the
‘STOPPED’ state.
INFO
If the machine is paused by
the operator, the operator
must also restart it.
INFO
It is possible that the state
will switch to ‘IDLE’ if no
notifications are active.
5. Skip to main menu
And press Tab ‘PRODUCTION
SELECTION’
6. You can now delete the batch on the
machine by pressing the ‘DELETE’
button
INFO
You do need the operator
password to do this!